Nighthawk Carbon Monoxide and Explosive Gas Alarm is a Multi - hazard alarm that protects you from both carbon monoxide and explosive gas. Featuring a sleek design that fits conveniently into any standard wall outlet. Alarm also features a digital readout of CO level with a continuous read out of measured CO values from 30 - 399 PPM. A loud 85 DB alarm that alerts you if CO levels become dangerous.
Advanced Technology in an Easy-to-Install, Plug-In Design Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring--even during power outages.
The Dangers of Carbon Monoxide, Methane, and Propane Exposure.
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it's odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.
Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.
Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels
When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with "GAS" shown in the display.
Easy-to-Read Digital Display Shows CO Levels
The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored-- from 30 to 999 ppm--and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.
LED Shows Sensor Status
With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it's working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.
Convenient Mounting Options
The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it's plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.
The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.
I have a Kidde model kn-coeg-3 / it just started chirping and showing a 55 number on the display. Can you tell me what it means. The detector has a Mfg. date of 2012 December, 20. and an assembly number 900-0113.
If the unit was showing a 55 and it was giving the 4 beep pattern it means that the alarm detected carbon monoxide. The only other things that can cause a chirp are if the alarm displays “Lb” for low battery or “ERR” for end of life.
My night carbon monoxide started to chirp and err.s sign showing how do fix it
An Err message may be due to an End-of-Life warning. Seven years after initial power up, the unit will Chirp every 30 seconds to indicate that it is time to replace the alarm.
Can I re-charge the battery on this unit?
No, it is a standard 9V battery
What does L6 mean when shown on the detector?
This is a low battery signal. The capital L with a lower case b on your digital display is letting you know the battery is low and needs to be replaced.