[shortdesc]

[/shortdesc]

Are your lights powered by a LED driver 0-10V? Are you looking for a solution to control them wirelessly, using your smartphone from your comfortable sofa? The Qubino Flush Dimmer 0-10V gives you an opportunity to connect your lights, running on 0-10V, to a smart home system, and control them wirelessly.

WHAT DOES IT DO? The only Z-Wave 0-10 V dimming controller. Connect it to a 0-10 LED driver for remote Z-Wave control of your low-voltage fixtures.
WHAT ELSE DO I NEED? A 12-24VDC power supply to power the module. If you’re adding manual control from a wall switch, make sure it’s either a momentary push-button switch or a simple on/off switch, NOT a dimmer (VERY IMPORTANT). You'll need a compatible Z-Wave hub for wireless control (scroll down for details). Alexa is NOT a Z-Wave hub.
WHY NOT GET A WALL Z-WAVE DIMMER? So you can actually control your low-voltage lights! Regular Z-Wave wall switches won’t play well with LED drivers with 0-10 V control so you won’t be able to use them here at all.
HOW IS IT BETTER? Made in Italy from top quality components that will last. It’s extremely small and will fit very tight cans. If your Z-Wave hub supports advanced parameter input (you’ll need a custom handler for SmartThings), you'll be able to set minimum and maximum dimming levels, adjust the ramp rate or add double-click to full brightness.

Features:

Z-Wave Signal Frequency: 908.42 MHz
Power: 12-24 VDC
Max Sinking Control Voltage: -20/ +20VDC
Max Sourcing Control Voltage: 0-11VDC
Power Consumption: 0.5 W
Z-Wave Range: Up to 130 feet line of sight
Operating Temperature: 14-104° F
Installation and Use: Indoor only
Dimensions: 1.6" x 1.4" x 0.6"
Weight: 1 oz

COMPATIBLE HUBS:

Do NOT buy if your controller is not listed below:

Fibaro Home Center Lite
Home Assistant
HomeSeer
Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
VeraEdge
VeraPlus
VeraSecure

Technical specifications

Power supply	12 - 24 VDC*
Max. sinking control voltage	-20 / +20 VDC
Max. sourcing control voltage	0 - 11 VDC
Accuracy	<3% FS
Max. sinking current	2 mA
Max. sourcing current	7 mA
Digital temperature sensor range (sensor must be ordered separately)	-25°C~+80°C (-13~ 176°F), resolution 0.1°C
Operation temperature	-10° ~ +40°C (14 ~ 104°F)
Distance	up to 30 m indoors (98 ft) (depending on building materials)
Dimensions (WxHxD)	41.8 x 36.8 x 15.4 mm / 1,65x1,45x0,66 in
(packaging)	74 x 43 x 86 mm / 2,91x1,69x3,39 in
Weight (including packaging)	18 g (44 g) / 0.63oz (1.55oz)
Electricity consumption	0.5 W

*SELV Type

Supported Z-Wave Frequencies

ORDERING CODE (MODEL NUMBER)	Z-WAVE FREQUENCY
ZMNHVD1	868.4 MHz
ZMNHVD2	921.4 MHz
ZMNHVD3	908.4 MHz
ZMNHVD4	869,0 MHz
ZMNHVD5	916,0 MHz
ZMNHVD6	868,4 MHz
ZMNHVD7	919,8 MHz
ZMNHVD8	865,2 MHz
ZMNHVD9	922,5 MHz
ZMNHVDA	919,7 – 921,7 – 923,7 MHz
ZMNHVDB	868,1 MHz
ZMNHVDC	868,1 MHz
ZMNHVDD	919,8 MHz
ZMNHVDE	920,9 MHz

===

In the Box:

1 x Controller
1 x User Manual

Qubino Z-Wave Plus 0-10 V Dimmer ZMNHVD3 for LED Low Voltage Dimmable Fixtures (Hub Required)