TPI Workstation Fan 120 Volt 360 Degree Horizontal, Vertical Swirl Air Circulator Venting Exhaust Fans U18-TE

$ 128.99
Availability: Out Of Stock

SKU: U18-TE
Commercial Fan
TPI Corporation
 Fans,HVAC,TPI Corporation
Description

The TPI Corporation U 18-TE single phase 18-inch diameter industrial workstation fan has a built-in swivel mount and is suitable for providing air circulation at an industrial workstation. The blade assembly, consisting of a steel hub and spider, holds the fan head’s three aluminum paddles, which are enclosed by front and rear powder-coated steel wire guards for strength and resistance to corrosion.

The built-in mount swivels 360 degrees vertically and horizontally for precise direction of airflow. The motor of the TPI workstation fan is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.

This TPI fan compact fans mounts quickly with one lag screw or bolt to workbenches, walls, beams, steel shelving, machines, ceilings or any surface. TPI Wall-Mount Workstation Fans feature a 3-speed industrial fan head that rotates 360 degrees to deliver air in any direction. Totally enclosed, sleeve bearing, permanently lubricated motor.

Also includes: pull chain switch, 10'L, 3-conductor cord, and three aluminum blades. Meets OSHA standards and is UL-listed. Mounting brackets to wall, ceiling, or pole are not included and must be purchased separately.

Specifications:

  • Permanently lubricated, totally closed sleeve bearing motor
  • Switch type Pull chain
  • Cord 10-foot SJT type three-conductor cord
  • Blades Aluminum x3
  • Blade guards Powder-coated steel wire
  • Cubic feet per minute (CFM) 4600 / 4200 / 3200
  • Weight 20 lbs.
  • Dimensions 21.5 x 20.5 x 10.5 inches (H x W x D)*
  • 3-speed, 2.2 amp, 120 volts, single-phase, 1/8 horsepower, permanently lubricated, totally closed sleeve bearing motor1/12 horsepower,
  • Tilts for convenience
  • 2.2-amp, 120-volt, single-phase, 1/8 horsepower,
  • Pull chain switch
  • Head rotates 360° vertically and horizontally
  • Coated steel guards
  • Steel hub with spider aluminum paddle blades
  • Meets OSHA standards
  • Intertek listed

Industrial fans are used in workplace environments to exhaust fumes or direct airflow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes.

They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of airflow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large blade fan. Industrial fans are used in warehouses, gyms, and other commercial environments to ventilate spaces and to circulate air.

*H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Info and Guides