[shortdesc]

[/shortdesc]

Not sure if you switched your lights off before leaving home? With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.

WHAT DOES IT DO? Install it behind your wall switch for Z-Wave wireless control. Great for lights, exhaust fans, or ceiling fans up to 10 Amps.
WHAT ELSE DO I NEED? Check for NEUTRAL wire in the electrical box (VERY IMPORTANT). You'll need a Z-Wave hub for wireless control. Basic on/off functionality will work on any Z-Wave hub (NOT Z-Wave alarm panels) but you'll need a compatible hub for advanced features and energy reports (scroll down for details). Alexa / Google Home is NOT a Z-Wave hub.
WHY NOT GET A WALL SWITCH? So you can keep your favorite toggles or specially designed switches on the wall without having to compromise for the limited style options of Z-Wave wall switches. Connect Qubino's digital temperature sensor (sold separately) to get additional functionality of a hard-wired thermometer.
HOW IS IT BETTER? Made in Italy from top quality components that will last. If your Z-Wave hub support energy monitoring (Wink and alarm panels DON'T), you'll be able to track power for the device connected to the relay. Set up the built-in timer for the relay to automatically turn off after being in use for too long. It will also remember and restore the on/off status after power failure.

SPECIFICATIONS:

Model Number: ZMNHAD3
Z-Wave Signal Frequency: 908.42 MHz
Power: 120 VAC
Maximum Load: 10 A (2300 W when powered by 120 VAC)
Power Consumption: 0.4 W
Z-Wave Range: Up to 130 feet line of sight
Operating Temperature: 14-104° F
Installation and Use: Indoor only
Dimensions: 1.6" x 1.4" x 0.6"
Weight: 1 oz

COMPATIBLE HUBS:

Do NOT buy if your controller is not listed below. Contact Seller first.

Domoticz
Fibaro Home Center Lite
Home Assistant
HomeSeer
Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
VeraEdge
VeraPlus
VeraSecure
Wink
Z-Wave Me

Technical specifications

Power supply	110 - 240 VAC ±10% 50/60Hz, (24-30 VDC)
Rated load current of AC output (resistive load)*	1 X 10A / 240 VAC
Rated load current of DC output (resistive load)	1 X 10A / 30 VDC
Output circuit power of AC output (resistive load)	2300 W (240 VAC)
Output circuit power of DC output (resistive load)	240 W (24 VDC)
Power measurement accuracy	P = 5–50 W, +/-3 W P > 50 W, +/-3%
Digital temperature sensor range (sensor must be ordered separately)	-25°C~+80°C (-13~ 176°F), resolution 0.1°C
Operation temperature	-10° ~ +40°C (14 ~ 104°F)
Distance	up to 30 m indoors (98 ft)
Dimensions (WxHxD)	41.8 x 36.8 x 15.4 mm / 1,65x1,45x0,66 in
(packaging)	74 x 43 x 86 mm / 2,91x1,69x3,39 in
Weight (including packaging)	24 g (50 g) / 0.85oz (1.76oz)
Electricity consumption	0.4 W
For installation in boxes	Ø ≥ 60 mm (2,36 in) or 2M, depth ≥ 60 mm (2,36 in)
Switching	Relay
Z-Wave Repeater	Yes

* In case of loads other than resistive loads, please pay attention to the value of cos φ. If necessary, connect loads less powerful than what they’re rated for – this applies to all motor loads. Max current for cos φ=0,4 is 3A at 250VAC, 3A at 24VDC L/R=7ms.

Supported Z-Wave Frequencies

ORDERING CODE (MODELING NUMBER)	Z-WAVE FREQUENCY
ZMNHAD1	868.4 MHz
ZMNHAD2	921.4 MHz
ZMNHAD3	908.4 MHz
ZMNHAD4	869,0 MHz
ZMNHAD5	916,0 MHz
ZMNHAD6	868,4 MHz
ZMNHAD7	919,8 MHz
ZMNHAD8	865,2 MHz
ZMNHAD9	922,5 MHz
ZMNHADA	919,7 – 921,7 – 923,7 MHz
ZMNHADB	868,1 MHz
ZMNHADC	868,1 MHz
ZMNHADD	919,8 MHz
ZMNHADE	920,9 MHz

===

In The Box:

1 x 1 Flush Relay
1 User Manual

Installation videos:

Socket

Switch

Smart Pool

Smart Irrigation

Qubino Z-Wave Plus Flush 1 Relay Switch and Energy Monitor ZMNHAD3