- WHAT DOES IT DO? Install it behind your wall switch for Z-Wave wireless control. Great for lights, exhaust fans, or ceiling fans up to 10 Amps.
- WHAT ELSE DO I NEED? Check for NEUTRAL wire in the electrical box (VERY IMPORTANT). You'll need a Z-Wave hub for wireless control. Basic on/off functionality will work on any Z-Wave hub (NOT Z-Wave alarm panels) but you'll need a compatible hub for advanced features and energy reports (scroll down for details). Alexa / Google Home is NOT a Z-Wave hub.
- WHY NOT GET A WALL SWITCH? So you can keep your favorite toggles or specially designed switches on the wall without having to compromise for the limited style options of Z-Wave wall switches. Connect Qubino's digital temperature sensor (sold separately) to get additional functionality of a hard-wired thermometer.
- HOW IS IT BETTER? Made in Italy from top quality components that will last. If your Z-Wave hub support energy monitoring (Wink and alarm panels DON'T), you'll be able to track power for the device connected to the relay. Set up the built-in timer for the relay to automatically turn off after being in use for too long. It will also remember and restore the on/off status after power failure.
- Model Number: ZMNHAD3
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC
- Maximum Load: 10 A (2300 W when powered by 120 VAC)
- Power Consumption: 0.4 W
- Z-Wave Range: Up to 130 feet line of sight
- Operating Temperature: 14-104° F
- Installation and Use: Indoor only
- Dimensions: 1.6" x 1.4" x 0.6"
- Weight: 1 oz
Do NOT buy if your controller is not listed below. Contact Seller first.
- Fibaro Home Center Lite
- Home Assistant
- Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
- Z-Wave Me
|Power supply||110 - 240 VAC ±10%
50/60Hz, (24-30 VDC)
|Rated load current of AC output (resistive load)*||1 X 10A / 240 VAC|
|Rated load current of DC output (resistive load)||1 X 10A / 30 VDC|
|Output circuit power of AC output (resistive load)||2300 W (240 VAC)|
|Output circuit power of DC output (resistive load)||240 W (24 VDC)|
|Power measurement accuracy||P = 5–50 W, +/-3 W
P > 50 W, +/-3%
|Digital temperature sensor range
(sensor must be ordered separately)
|-25°C~+80°C (-13~ 176°F), resolution 0.1°C|
|Operation temperature||-10° ~ +40°C (14 ~ 104°F)|
|Distance||up to 30 m indoors (98 ft)|
|Dimensions (WxHxD)||41.8 x 36.8 x 15.4 mm / 1,65x1,45x0,66 in|
|(packaging)||74 x 43 x 86 mm / 2,91x1,69x3,39 in|
|Weight (including packaging)||24 g (50 g) / 0.85oz (1.76oz)|
|Electricity consumption||0.4 W|
|For installation in boxes||Ø ≥ 60 mm (2,36 in) or 2M, depth ≥ 60 mm (2,36 in)|
* In case of loads other than resistive loads, please pay attention to the value of cos φ. If necessary, connect loads less powerful than what they’re rated for – this applies to all motor loads. Max current for cos φ=0,4 is 3A at 250VAC, 3A at 24VDC L/R=7ms.
Supported Z-Wave Frequencies
|ORDERING CODE (MODELING NUMBER)||Z-WAVE FREQUENCY|
|ZMNHADA||919,7 – 921,7 – 923,7 MHz|