LCN 4040 Heavy Duty Door Closer - Dark Bronze Powder Coat Finished - Extra Duty Arm


LCN 4040XP EDA Bronze


Shop With Confidence

The LCN 4040XP door closer has a double lever, forged steel arm, has a dark bronze powder coated finish and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles.

All-weather hydraulic fluid helps reduce the need for seasonal adjustment.  The double lever arm is made of forged steel for high traffic settings and can be installed for a regular or a top-of-jamb mount. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed.

The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 Grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating and complies with the UL 10C positive pressure fire test.



 Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings

Control Type Extra-Duty
Hand Orientation Non-Handed

Arm construction

Forged steel main arm, stamped steel forearm



Finish Type Dark Bronze Powder Coat


Hinge (Pull) side, top jamb (push)

Interior door width

24" to 60"

Exterior door width

24" to 48"

Maximum door opening

120 degrees


Grade 1


10 Million 

UL compliance

3-hour fire rating, UL 10C


In the Box:

  • Hydraulic cylinder
  • Standard double lever arm
  • Parallel arm shoe
  • Plastic cylinder cover
  • Peel-n-stick installation template
  • Fastener pack:
    • Thru-bolt
    • Taping screws


Have a Question?

Be the first to ask a question about this.

Ask a Question