Kidde - i9010 Smoke Detector, 3V 10-Year Sealed Lithium Battery Powered w/Memory & Smart Hush

$ 21.50
Availability: Out Of Stock

Alarm Type Smoke
Power Source Battery
Interconnects No
Battery 10 Year

SKU: i9010
Smoke Alarms
 Fire Safety,Home Safety,Kidde Smoke Detectors,Smoke Alarm
Braeburn Digital Thermostat
Programmable wi fi thermostat
Affordable wifi thermostat

No need to worry about faulty batteries with the Kidde i9010 10-Year Sealed Lithium Battery-Operated Smoke Alarm. This worry-free alarm contains a sealed-in lithium power supply that lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and battery costs over its lifetime.

This worry-free smoke alarm can save you a lot of time and money over its lifetime (an estimated $60 over the 10-year life of the alarm). This alarm can save you--and the local landfill--from the cost, hassle, and waste of lots of batteries. This smoke alarm is also a great choice for hallways and high ceilings, where changing batteries can be especially difficult.

This alarm uses ionization sensing technology for the smoke alarm. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

Great for Homes and Rental Properties
This tamper-free alarm prevents battery or alarm removal, eliminating worry about unauthorized battery removal or unauthorized deactivation of the alarm. Also, this alarm is a good choice for rental properties and high-density dwellings, as its sealed tamper-free design prevents theft, while also reducing labor and material costs. This helps to ensure that the property and inhabitants are protected by a fully operational alarm.

Easy to Install with Self Activation
The innovative automatic activation of this alarm is unlike any other smoke alarm design. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull tabs and no switches--everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. You can use a simple tool, such as a screwdriver, to deactivate the unit, stopping the low-battery chirp and making the alarm safe for disposal. The sealed-in board-mounted batteries will power the unit for its complete 10-year life. No replacement batteries will ever be needed.

Trademarked Hush Feature for Convenience
By pressing the smoke alarm's Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to eight minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm.

The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every eight seconds while in Hush mode. This indicates that the alarm is in a temporarily desensitized condition.

Additionally, the smoke alarm will automatically reset after approximately eight minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.

Power Outage Protection, Indicator LED, and Test Feature
A 10-year sealed lithium battery powers this alarm, providing continuous protection against smoke and fire hazards even during power outages. Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 40 to 45 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a Test/Reset button that enables you to periodically test its circuitry and horn.

The unit measures just 5.6 inches in diameter and 1.5 inches in depth, and it features a neutral, white finish.

This smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty. 

The Kidde i9010 is a 10 Year Smoke alarm and meets New York and California State Fire laws. For a full list of states and cities requiring 10 Year alarms click here. 

Don't know what type of smoke alarm is right for your home? Check out our guide on how to choose the right smoke detector for your home. 

Info and Guides