Dakota Alert DCPT-2500 Duty Cycle Probe Transmitter

$ 161.69
Availability: Out Of Stock
The DCPA-2500 is a driveway alarm kit that is used to detect vehicles only. The transmitter operates on four cr123a batteries and has 50’ of direct burial wire connecting the...
SKU: DA DCPT-2500
Security Sensors
Dakota Alert
 Garage Door Accessories,Home Safety
Description

The DCPA-2500 is a driveway alarm kit that is used to detect vehicles only. The transmitter operates on four cr123a batteries and has 50’ of direct burial wire connecting the probe to the exterior case. The probe is buried parallel to the driveway and will detect vehicles passing by within approximately 10-12 feet. The direct burial cable can be run to a tree or post nearby, where the transmitter box is located. When a vehicle drives by, the transmitter will send a signal to the DCR-2500 receiver up to ½ a mile away.

The DCPA-2500 is ideal in locations where there may be deer or other large animals that would cause false signals with a motion detecting system. Also, because the probe is buried underground, it will be the least noticeable of our wireless systems. The transmitter is weatherproof and meant for exterior locations.

The DCPT-2500 transmitter is an extra transmitter for the DCPA-2500 kit that can be used in other locations; for example, a second driveway, other buildings, the backyard, etc. Up to four different transmitters can be used, with different musical tunes, so that different zones can be distinguished.

  • Quick and simple installation.
  • Up to four sensors can work from various locations.
  • Wired vehicle motion detector.
  • Up to a 1/2 mile radio range.
  • Will detect a vehicle only out to about 50 ft.
  • Quick and simple installation.
  • Up to four sensors can work from various locations.
  • Actual range will vary depending on the environment.

Installation Instruction:

  • The control box simply plugs into a 110-volt outlet, and has an on/off switch on the top of the box.
  • There is a set of contacts to connect the two wires from the probe, as well as a set of 12-volt DC (500mA max) contacts.
  • The voltage output can be used to operate sirens, bells, or a light timer.
  • Everything is color coded and labeled for easy reference.
  • The whistle and the voltage output are adjustable for 2, 4 or 8 seconds.
  • The control box can run up to three probes, and has a sensitivity control so that it can be custom tuned to each application.