Qubino Z-Wave Flush 2 Relays - ZMNHBD3

$ 54.95 $ 49.95
Availability: Out Of Stock

SKU: ZMNHBD3
Smart Home Automation
Qubino
 Lighting,Qubino,Smart Home
Braeburn Digital Thermostat
Programmable wi fi thermostat
Affordable wifi thermostat
Description

Want to control two lights at the same time? Do you have more than one light in one room? With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.

 

  • 2-IN-1: Control 2 different loads (set of lights) individually via Z-Wave (compatible controller required, sold separately).
  • SAVE SPACE: This module will fit in the most crowded switch box. It's the best choice for double and triple gang boxes.
  • SAVE MONEY: Use just one Qubino module to automate 2 different light switches. It installs behind your existing wall switches so you can keep your favorite style and spend less on equipment. Works great with LED's!
  • BONUS FEATURES: Reports status instantly and monitors energy use for each load. Features a built-in timer so you can set your lights and devices to turns off automatically even if your Internet is down.
  • MAKES THINGS EASIER: Auto-inclusion for quick and convenient installation. Restores on/off status after power failure. Works well with any type of mechanical wall switch (toggle and decora style, will NOT work with dimmers and electronic switches). NEUTRAL WIRE REQUIRED.

 

SPECIFICATIONS:
    • Model Number: ZMNHBD3
    • Z-Wave Signal Frequency: 908.42 MHz
    • Power: 110-240V / 12-24 VDC
    • Maximum (Resistive) Load for 110VAC: 2 x 920W / 4A
    • Maximum (Resistive) Load for 24VDC: 2 x 96W / 4A
    • Power Consumption: 0.4 W
    • Z-Wave Range: Up to 130 feet line of sight
    • Operating Temperature: 14-104° F (0-40° C)
    • Installation and Use: Indoor only
    • Dimensions: 1.6" x 1.4" x 0.6"
    • Weight: 1 oz



COMPATIBLE HUBS:


Do NOT buy if your controller is not listed below. 

  • Fibaro Home Center Lite
  • HomeSeer
  • Samsung SmartThings Hub with custom device handler - Contact Qubino for Instructions
  • VeraEdge
  • VeraPlus
  • Z-Wave Me
  • Zipato ZipaTile

 

Technical specifications

Power supply 110 - 240 VAC ±10%
50 / 60 Hz, (24–30 VDC)
Rated load current of AC output (resistive load)* 2 X 4 A / 240 VAC
Rated load current of DC output (resistive load) 2 X 4 A / 30 VDC
Output circuit power of AC output (resistive load) 2 X 920 W (240 VAC)
Output circuit power of DC output (resistive load) 2 X 96 W (24 VDC)
Power measurement accuracy P = 0-200 W, +/- 2 W
P > 200 W, +/-3%
Digital temperature sensor range
(sensor must be ordered separately)
-25°C~+80°C (-13~ 176°F), resolution 0.1°C
Operation temperature -10° ~ +40°C (14 ~ 104°F)
Distance up to 30 m indoors (98 ft)
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 16.9 mm / 1,65x1,45x0,66 in
(packaging) 74 x 43 x 86 mm / 2,91x1,69x3,39 in
Weight (including packaging) 28 g (54 g) / 0.99oz (1.90oz)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm (2,36 in) or 2 M, depth ≥ 60 mm (2,36 in)
Switching Relay (2x)

* In case of loads other than resistive loads, please pay attention to the value of cos φ. If necessary, connect loads less powerful than what they’re rated for – this applies to all motor loads. Max current for cos φ=0,4 is 2A at 250VAC, 3A at 24VDC.

Supported Z-Wave Frequencies

ORDERING CODE (MODELING NUMBER) Z-WAVE FREQUENCY
ZMNHBD1 868.4 MHz
ZMNHBD2 921.4 MHz
ZMNHBD3 908.4 MHz
ZMNHBD4 869,0 MHz
ZMNHBD5 916,0 MHz
ZMNHBD6 868,4 MHz
ZMNHBD7 919,8 MHz
ZMNHBD8 865,2 MHz
ZMNHBD9 922,5 MHz
ZMNHBDA 919,7 – 921,7 – 923,7 MHz
ZMNHBDB 868,1 MHz
ZMNHBDC 868,1 MHz
ZMNHBDD 919,8 MHz
ZMNHBDE 920,9 MHz

 

Info and Guides