Minelab Gold Monster 1000 Metal Detector (3317-0001)

$ 999.00
Availability: Out Of Stock

Overall Length  54.4" inches
Weight 2.94lbs
Detect Modes
Gold (Iron reject), Deep All-Metal

SKU: 3317-0001
Metal Detectors
Minelab
 Camping & Outdoors,Holiday Gift Guide,Minelab
Braeburn Digital Thermostat
Programmable wi fi thermostat
Affordable wifi thermostat
Description

Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.

When comparing detectors, the important factor is each detector's ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector's sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets = 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets = 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

The GOLD MONSTER 1000 features fully automatic operation and comes with a choiceof coils, battery options and shaft configurations. If you're looking for super sensitive gold performance at a great price, then this is the detector you've been waiting for!

Features:

  • Fully automatic operation
  • Extra sensitive 45 kHz VLF performance
  • Highly adaptable
  • 2 search coils included
  • Easy quick start 

Features VLF technologies

VLF (Very Low Frequency) is a conventional single frequency sine wave continuous transmission technology. This is the traditional type of technology used in most basic metal detectors. Single frequency sine wave detectors create an electro-magnetic field, which is transmitted into the ground in a continuous wave. While the basic way that the signal is sent out and received back has not changed, the receive signal processing has improved enormously. This has proven to be a reliable and easy to use technology for finding gold.

Info and Guides