Qubino Z-Wave Plus 0-10 V Dimmer ZMNHVD3 for LED Low Voltage Dimmable Fixtures (Hub Required)

$ 54.95 $ 51.95
Availability: Out Of Stock

SKU: ZMNHVD3
Smart Home Automation
Qubino
 Lighting,Qubino,Smart Home
Braeburn Digital Thermostat
Programmable wi fi thermostat
Affordable wifi thermostat
Description

Are your lights powered by a LED driver 0-10V? Are you looking for a solution to control them wirelessly, using your smartphone from your comfortable sofa? The Qubino Flush Dimmer 0-10V gives you an opportunity to connect your lights, running on 0-10V, to a smart home system, and control them wirelessly.

  • WHAT DOES IT DO? The only Z-Wave 0-10 V dimming controller. Connect it to a 0-10 LED driver for remote Z-Wave control of your low-voltage fixtures.
  • WHAT ELSE DO I NEED? A 12-24VDC power supply to power the module. If you’re adding manual control from a wall switch, make sure it’s either a momentary push-button switch or a simple on/off switch, NOT a dimmer (VERY IMPORTANT). You'll need a compatible Z-Wave hub for wireless control (scroll down for details). Alexa is NOT a Z-Wave hub.
  • WHY NOT GET A WALL Z-WAVE DIMMER? So you can actually control your low-voltage lights! Regular Z-Wave wall switches won’t play well with LED drivers with 0-10 V control so you won’t be able to use them here at all.
  • HOW IS IT BETTER? Made in Italy from top quality components that will last. It’s extremely small and will fit very tight cans. If your Z-Wave hub supports advanced parameter input (you’ll need a custom handler for SmartThings), you'll be able to set minimum and maximum dimming levels, adjust the ramp rate or add double-click to full brightness.

 

Features:
      • Z-Wave Signal Frequency: 908.42 MHz
      • Power: 12-24 VDC
      • Max Sinking Control Voltage: -20/ +20VDC
      • Max Sourcing Control Voltage: 0-11VDC
      • Power Consumption: 0.5 W
      • Z-Wave Range: Up to 130 feet line of sight
      • Operating Temperature: 14-104° F
      • Installation and Use: Indoor only
      • Dimensions: 1.6" x 1.4" x 0.6"
      • Weight: 1 oz


COMPATIBLE HUBS:

Do NOT buy if your controller is not listed below:

    • Fibaro Home Center Lite
    • Home Assistant
    • HomeSeer
    • Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
    • VeraEdge
    • VeraPlus
    • VeraSecure

Technical specifications

Power supply 12 - 24 VDC*
Max. sinking control voltage -20 / +20 VDC
Max. sourcing control voltage 0 - 11 VDC
Accuracy <3% FS
Max. sinking current 2 mA
Max. sourcing current 7 mA
Digital temperature sensor range
(sensor must be ordered separately)
-25°C~+80°C (-13~ 176°F), resolution 0.1°C
Operation temperature -10° ~ +40°C (14 ~ 104°F)
Distance up to 30 m indoors (98 ft)
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm / 1,65x1,45x0,66 in
(packaging) 74 x 43 x 86 mm / 2,91x1,69x3,39 in
Weight (including packaging) 18 g (44 g) / 0.63oz (1.55oz)
Electricity consumption 0.5 W

*SELV Type

Supported Z-Wave Frequencies

ORDERING CODE (MODEL NUMBER) Z-WAVE FREQUENCY
ZMNHVD1 868.4 MHz
ZMNHVD2 921.4 MHz
ZMNHVD3 908.4 MHz
ZMNHVD4 869,0 MHz
ZMNHVD5 916,0 MHz
ZMNHVD6 868,4 MHz
ZMNHVD7 919,8 MHz
ZMNHVD8 865,2 MHz
ZMNHVD9 922,5 MHz
ZMNHVDA 919,7 – 921,7 – 923,7 MHz
ZMNHVDB 868,1 MHz
ZMNHVDC 868,1 MHz
ZMNHVDD 919,8 MHz
ZMNHVDE 920,9 MHz

 

Info and Guides